> Informations Photomurals <

             All motives were chosen so that you will be able to cut them up on all sides without losing effect on the whole.

           

1. Preparation of the surface
   The wall must be prepared like for the traditional wall papers. The surface must be clean, smooth and not fatty - oil painting must be sanded completely, rests of wall papers are to take away, impurities are to sand and holes or fissures to cement. To allow a good drying, the surface must be able to absorb humidity.
2. Glue
   Use a glue for traditional wall papers with reached instructions.
3. Draw ledger lines
   Many walls are not right-angled. It is recommended to you to begin to paste in the middle of the wall. You may need a horizontal line and a vertical line to help yourself,  just draw it with the pencil and aid of a water-level and with a plumb. 
4. Paperhanging
   Glue every party (one by one) with regular movements. Don't forget the corners.
   Important : Do not let gush the glue for a long time on paper (max. 1 - 2 min.) and do not stack the glued parts together.
5. Apply
   Apply the corresponding parts against the ledger lines. Slick downwards and dispel the air from the middle towards sides.
   Parts can overlap from 2 to 3 mm.
6. Drying
   The drying must be slowly made to avoid a separation at the junctions or cracks in the paper. Let dry at 18 - 20 °, avoid air drafts (keep the windows closed, avoid overheating in winter).
7. Superluous edges
   You can take away the superfluous edges from the photomural with a cutter.

>> BACK <<

---